Linak TECHLINE LA36 Manual do Utilizador descarregar pdf (Página 11)

The cover over the Allen key socket must be unscrewed before the Allen

key can be inserted and the Hand Crank operated.

Hand Crank Torque: 6 - 8 Nm ( 2600 N – 6800 N load )

Piston Rod movement per turn

Gear A = 10.5 mm

Gear B = 6.0 mm

Gear C = 4.0 mm

Application hints

The actuator is weather proof for use in outdoor applications. The actuator

can be washed down with a high pressure washer, but it should not be used

under water.

Optionally the actuator is overload protected with a slip clutch. The clutch will

slip when the load exceeds approx. 1.2 - 1.4 times the actuators rating.

The duty cycle at max. load is 20% on time. This means if the actuator

runs continuously for 20 seconds it must remain off for 80 seconds before

operating again.

The manual hand crank can be used in the case of power failure.

Note: The power supply has to be disconnected during manual

operation.

6 mm Allen key

Manual hand crank

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Sem comentários

Linak TECHLINE LA36 Manual do Utilizador Página 11